Brown:Tri-Stable toggle switch

From 2006.igem.org

(Difference between revisions)
Jump to: navigation, search
(General Parameters)
 
(46 intermediate revisions not shown)
Line 5: Line 5:
[[Image:Tristable_Toggle.jpg|left|500px|A general tri-stable toggle]]
[[Image:Tristable_Toggle.jpg|left|500px|A general tri-stable toggle]]
 +
Our implementation uses the pLac, pTet, and pBad/AraC promoters and their respective inhibiting proteins. We chose these because of the relative ease with which each promoter is induced: by adding IPTG for the pLac-promoted region, tetracycline for the PTet-promoted region, and arabinose for the pBad/Ara genes. By characterizing each of the three pathways without following genes and terminators, we enable a tri-stable switching network of any three biobricks to be constructed with minimal cloning.
Our implementation uses the pLac, pTet, and pBad/AraC promoters and their respective inhibiting proteins. We chose these because of the relative ease with which each promoter is induced: by adding IPTG for the pLac-promoted region, tetracycline for the PTet-promoted region, and arabinose for the pBad/Ara genes. By characterizing each of the three pathways without following genes and terminators, we enable a tri-stable switching network of any three biobricks to be constructed with minimal cloning.
[[Image:Registry_tristable.jpg|Our implementation]]
[[Image:Registry_tristable.jpg|Our implementation]]
 +
<br><br>
<br><br>
-
<br>
+
Link to tri-stable switch on the registry:[http://partsregistry.org/Part:BBa_J24672 Tri-stable Switch]
-
<br>
+
-
=Modeling the tri-stable toggle switch=
+
-
While the tri-stable switch is seemingly simple in design, just like any other system it is subject to potentially comprising factors such as promoter leakiness and other stochastic fluctuations. In an attempt to predict the behavior of the tri-stable switch, we created a deterministic model of the system taking into account these factors.  The model structure is based on that described in "Prediction and measurement of an autoregulatory genetic module" by Farren Isaacs, et al.  This paper features an excellent supplement that takes you hand-in-hand through the derivation of model equations.  I will attempt to emulate this derivation with our  model below.  It is important to note that while we have some preliminary results, our model is very much a work in progress.  In order to model the system accurately, many of the fundamental constants governing the model will need to be determined experimentally. For now we have used some constants from the literature and estimated some based on similar the values of similar constants also from the literature. 
+
-
==Derivation of the Model Equations==
 
-
The chemical reactions describing the tri-stable switch can be divided into the two catagories of fast and slow reactions.  Fast reactions such as dimer formation and promoter-binding occur in the scale of seconds and are therefore modeled to be in equilibrium.  Conversely, slow reactions including the likes of transcription, translation, and protein degradation occur on the scale of minutes and are thus modeled to be evolving with time. 
 
-
====Fast reversible reaction equations====
 
-
The following equations (1) describe the fast reactions.  The characters L,T,A denote molecules of LacI, TetR, and, AraC, respectively while the subscripts denote whether the molecule is a monomer (blank), dimer(2), tri-mer(3), etc. The k's denote reaction rates.
 
-
[[Image:Fast_rxn_eqs1.png]]
 
-
Note that the equations include volume explicitly.  Cell volume is modeled in this way as it is a slowly evolving function of time.
 
-
====Slow irreversible reaction equations====
+
=Modeling the tri-stable toggle switch=
-
The following equations (2) describe the slow irreversible reactions of transcription and translation (both taken into account with the reaction rate kti) and protein degradation (reaction constant kdi). The coefficients eta-ij take into account the relative translation rates of proteins from the same transcripts. For eta-ij, "i" represents the promoter responsible for producing the molecule and "j" represents the molecule being translated [ex: eta-LA corresponds to the relative rate of AraC production from the trascript produced by the LacI promoter]To establish a convention, eta's are relative to the translation rate of the first gene on a particular transcriptThus eta for the first gene on the mRNA transcript = 1The alpha-i coefficients represent relative transcription rates.  In this case, "i" denotes the promoter from which the mRNA is transcribed.
+
While the tri-stable switch is seemingly simple in design, just like any other system it is subject to potentially comprising factors such as promoter leakiness and other stochastic fluctuations. In an attempt to predict the behavior of the tri-stable switch, we created a deterministic model of the system taking into account these factors.  The model structure is based on that described in "Prediction and measurement of an autoregulatory genetic module" by Farren Isaacs, et alThis paper features an excellent supplement that takes you hand-in-hand through the derivation of model equationsI will attempt to emulate this derivation with our  model belowIt is important to note that while we have some preliminary results, our model is very much a work in progress.  In order to model the system accurately, many of the fundamental constants governing the model will need to be determined experimentally. For now we have used some constants from the literature and estimated some based on similar the values of similar constants also from the literature.
-
[[Image:slow_rxn_eqs.png]]
+
====Derivation of the Model Equations====
-
====Equations governing cell volume====
+
[[Derivation of the Model Equations]]
-
The following two equations (3) describing cellular growth and division are taken directly from the aforementioned paper by Isaacs et al.  The first equation describes the volume increase from the time immediately following cell division to the time immediately before it.  In this equation, V0 denotes the volume of the cell at the beginning of growth and T0 denotes the time of cell division.  In our model at times T=q*t0 in which q is an integer, we have volume V and protein concentration n halve - thus modeling volume division and the resulting protein redistribution.  The second equation describes the dimensionless equation in which t is measured in terms of fcell-division time and the cell volume changes between 1 and 2.
+
-
[[Image:vol_eq.png]]
+
====Table of preliminary model constants====
-
====Equations for the total number of molecules====
+
[[Table of preliminary model constants]]
-
The following equations (4) describe the total number of inhibitor protein molecules zi. d#i represents the number, "#", of molecules bound  to the "i" promoter.  (ex: all of the LacI tetramers bound to pLacI promoters are accounted for by the 4d1L term.)
+
-
[[Image:Tot_mol_eq.png]]
+
-
====Equations describing the temporal evolution of the total number inhibitor molecules====
+
==Preliminary modeling results==
-
The following equations (5) describe the temporal evolution of the total number of inhibitor molecules.  Beta-i = the cell division time multiplied by the combined transcription and tranlation rates from a given promoter "i" (t0*kti), thus representing the total number of protein molecules maximally produced by a given promoter.  Similarly, Gamma-i = the cell division time multipled by the degradation rate of protein i (t0*kdi), thus representing the total number of protein i destabilized over one cell division time.  The eta and alpha terms are described in the section above describing the equations for the slow reactions.  Note that the equation describing the temporal evolution of AraC includes the term "Aend."  This term represents the endogenous expression of AraC in dH5alpha's.  Our preliminary work suggests that this endogenous AraC has very little effect on our pBad promoter.
+
-
[[Image:Ev_tot_mol_eqs.png]]
+
The preliminary modeling results predict things about of the the tri-stable switch.  First of all, the model confirms certain obvious points such as the a shift to the proper steady expression state in the presence of inducers.  This prediction attests to model validity more than anything else.  Secondly, the model predicts that the switch will reach a natural steady state with one promoter dominating in the absence of inducers.  This makes intuitive sense as the individual promoters will most likely have different strengths.  
-
====Fast reaction equilibrium equations====
+
[[Image:no_inducer.png]]
-
Compared to the slowly evolving reactions(2) described by the above equations (5), the fast reactions (1) can be considered to be in equilibrium.  Thus the following equilibrium relations (6) hold.
+
-
[[Image:Fast_eq_eqs.png]]
+
-
====Equations modeling the presence of the inducers====
+
Next we tested the stability of the model by plugging in final steady-state induced levels of protein into an inducer-less system. The model predicts that the system will not remain stable and will instead revert back to the natural steady state for the inducer-less system. Even after changing several model parameters, the switch would not remain stable.
-
The following equations (7) model the effect of the chemical inducers on the system. The model regards the proteins bound to the inducers as having increased dissociation rates (ki-#) as specified below. The reation rate with the apostrophe denotes the original reaction rate in the absence of inducer inclusion. In these equations "I" denotes IPTG, "a" denotes arabinose, and "Tc" denotes tetracycline (or analogue aTc). The concept for and the form of these equations are based on equations described in the supplementary Information for "A bottom-up approach to gene regulation" by Guido et al. Much like the aforementioned paper by Isaacs et al., 'Bottom-up' has an extensive and brilliantly articulate derviation supplement.  
+
-
[[Image:inducer_eqs.png]]
 
-
====Equations relating plasmid copy number to operator sites====
+
[[Image:stability_test1.png]]
-
The following equations (8) relate the plasmid copy number, "m", to the number of promoters with bound and unbound operators. As each plasmid contains 1 of each promoter, m is constant for all three promoter types. 
+
-
[[Image:cop_num_eqs.png]]
+
As a test of the model, models of the three potential bi-stable switches (already proven to be successful experimentally) using the same components and parameters were tested.  In accordance with the literature, each of these constructs maintained stable expression of the induced state following the removal of the inducer.  In order to probe the instability of the tri-stable switch further, tri-stable switches in which all of the components were effectively the same were created (ex:for all LacI-like, TetR and AraC were modeled as forming tetramers and having one operator.)  Each of these systems reached a steady state in which all of the proteins evolved identically and were present at the same levels in the absence of inducer.  The same stability tests were then performed. All of the constructs remained stable.  Thus our model suggests that the similarity of the repressor-expression systems dominates the success or failure of the tri-stable switch.  Furthermore, the bi-stable switch is less sensitive to this factor.
-
====Simplified fast reaction equilibrium equations====
+
It should be noted that this is only a preliminary model. The values obtained from the literature will most like differ in our systemThrough future experimentation we will elucidate these values and thus create a more accurate model.  We will also conduct parameter scans aimed to provide further insight into the necessary system requirements for "tri-stability."
-
The equilibrium equations governing the fast reactions (6) can be simplified by defining dimensionless equilibrium constants in the form of cij=kij/(k(-ij)*V0*A) in which A is Avogadro's number. The cL's are further simplified by defining the constant cL=c1L*c2L*c3L*c4LAdditionally by plugging in successive terms we were able to write the operator equations in terms of d0L.   
+
   
-
[[Image:Simp_fast_eq_eqs.png]]
 
-
====Equations for the number of unbound operators====
 
-
Combining equations (8) and the above simplified equilibrium equations(9), we are able to solve for the number of unbound operators d0i. 
 
-
[[Image:Unbound_eqs.png]]
+
Link to MATLAB code for tri-stable model [[Media:tristable1.txt]]
-
====Equations for the number of bound operators====
+
Note: copy this code into MATLAB and save as an M-file
-
By plugging the d0i's (10) back into the equations for bound operators (9), we can solve for these equations in terms of monomer concentrations.
+
 +
=What we achieved=
-
[[Image:bound_eqs.png]]
+
A successfully ligated pBad/arac construct in addition to partially completed ligations for the pLacI and the pTetR constructs were the results of our summer and semesters' work. The tri-stable toggle switch system was also modeled and proved to yield significant findings.
-
 
+
-
====Equation manipulations to determine change in protein monomers per time====
+
-
Next we can rewrite the equations describing the temporal evolution of the total number inhibitor molecules (5) in terms of equations (10) and (11).  This yields the somewhat complex equations (12) which are solely in terms of monomer protein concentration.
+
-
 
+
-
[[Image:dzdt_eqs.png]]
+
-
 
+
-
====Equations for the change in protein monomers per time====
+
-
By applying the simple mathematical manipulation (13) to equations (12) and the X derivative of equations (9) ((9) can be written in terms of X by plugging in equations (10) and (11)) we can solve for the following equations for the evolution of protein monomers as a function of time (14). I will spare you the dZi/dXi derivative equations of equation (9).
+
-
 
+
-
[[Image:simp_mat_man_eq.png]]
+
-
 
+
-
====Equations describing stochastic variation====
+
-
 
+
-
====Equations for the evolution of fluorescent reporters====
+
-
 
+
-
==Table of preliminary model constants==
+
-
====General Parameters====
+
-
{| border=1 cellspacing=0 cellpadding=5
+
-
 
+
-
!align="left" width="50" | Parameter
+
-
!width="50" | Value
+
-
!width="300" | Meaning
+
-
 
+
-
|-
+
-
|m
+
-
|20 Copies
+
-
|Plasmid Copy Number
+
-
|-
+
-
|}
+
-
 
+
-
====Inhibitor Protein Parameters====
+
-
{| border=1 cellspacing=0 cellpadding=5
+
-
 
+
-
!align="left" width="50" | Parameter
+
-
!width="50" | Value
+
-
!width="300" | Meaning
+
-
 
+
-
|-
+
-
|alphaT1
+
-
|.01
+
-
|Relative transcription level for repressed (1 TetR dimer bound) pTetR promoter
+
-
|-
+
-
|alphaT2
+
-
|.01
+
-
|Relative transcription level for doubly repressed (2 TetR dimers bound) pTetR promoter
+
-
|-
+
-
|alphaL
+
-
|.01
+
-
|Relative transcription level for repressed (1 LacI tetramer bound) pLacI promoter
+
-
|-
+
-
|alphaA
+
-
|.01
+
-
|Relative transcription level for repressed (two AraC  monomers bound) pBAD promoter
+
-
|-
+
-
|betaA
+
-
|1000
+
-
|maximum number of proteins produced from the pBAD promoter per cell division
+
-
|-
+
-
|betaL
+
-
|1000
+
-
|maximum number of proteins produced from the pLacI promoter per cell division
+
-
|-
+
-
|betaT
+
-
|1000
+
-
|maximum number of proteins produced from the pTetR promoter per cell division
+
-
|-
+
-
|etaLT
+
-
|1
+
-
|Relative rate of TetR translation from pLacI promoter
+
-
|-
+
-
|etaLA
+
-
|1
+
-
|Relative rate of AraC translation from pLacI promoter
+
-
|-
+
-
|etaAL
+
-
|1
+
-
|Relative rate of LacI translation from pBAD promoter
+
-
|-
+
-
|etaAT
+
-
|1
+
-
|Relative rate of TetR translation from pBAD promoter
+
-
|-
+
-
|etaTL
+
-
|1
+
-
|Relative rate of LacI translation from pTetR promoter
+
-
|-
+
-
|etaTA
+
-
|1
+
-
|Relative rate of AraC translation from pTetR promoter
+
-
|-
+
-
|c1L
+
-
|.05
+
-
|Equilibrium constant for LacI dimerization
+
-
|-
+
-
|c2L
+
-
|.05
+
-
|Equilibrium constant for LacI trimerization
+
-
|-
+
-
|c3L
+
-
|.05
+
-
|Equilibrium constant for LacI tetramerization
+
-
|-
+
-
|c4L
+
-
|.33
+
-
|Equilibrium constant for LacI binding
+
-
|-
+
-
|}
+
-
 
+
-
==Preliminary modeling results==
+
-
 
+
-
Coming Soon...
+
-
Link to MATLAB code for tri-stable model [[Media:tristable1.m]]
+
=Challenges=
-
--[[User:Jlohmuel|Jlohmuel]] 03:59, 28 October 2006 (EDT)
+
Despite many cloning and ligation attempts, we were unable to create each component of the switch. More specifically, the pLacI and the pTetR circuits presented many ligation difficulties and proved to yield unsuccessful cloning. However, the pBAD/araC circuit was successfully constructed (yay!).
-
==What we achieved==
+
=Conclusions=
-
==Challenges==
+
With the bigger picture in mind,this project yielded many successful outcomes.Firstly, we were able to successfully construct one of the three constructs necessary for a fully functional tri-stable toggle switch. Secondly, we were able to add more working parts to the registry, both a fully functioning pBad/AraC construct and many parts that were successfully ligated in the process of assembling the other two constructs. These parts will be used in the future by our team and perhaps many others as new ideas and projects develop. Also, it is necessary to mention our most recent finding from the modeling results for the tri-stable toggle switch. Interestingly enough, our model suggests that it is biologically unfeasible to create a switch with more than two components. If more than two components are introduced, such as three, the system is unable to maintain any one state and it will revert back to expressing its most dominant promoter construct. We find such results quite meaningful in demonstrating the biological limits of a system under study.
-
==Conclusions==
+
=Future work=
-
==Future work==
+
In the coming months, it is hoped that the failure of the ligation strategies for the pLacI and the pTetR constructs can be further investigated. We feel confident that we can continue to build from the one successful construction,the pBad/Arac construct and complete the other 2 constructs. To this end, it will be necessary to further troubleshoot the possible reasons why the cloning of the ligations were unsuccessful.  Also we plan to conduct various experiments to elucidate more accurate model parameters specific to our system.  Furthermore we will perform a parameter scan to investigate the determinates of "tri-stability."

Latest revision as of 05:31, 12 November 2006

CSAIL logo

Home        People        Research        iGEM Proposal        Coming to Brown?        Contact        Projects              

Contents

A tri-stable toggle switch

Pursuant to the the 1999 paper "Construction of a genetic toggle switch in Escherichia coli," by Timothy S. Gardner, Charles R. Cantor and James J. Collins, we wondered if the bi-stable toggle switch could be generalized to an n-stable switch. To that end, we conceived and began construction of the tri-stable toggle switch. The general idea is that when a selected promoter is activated, it represses the other two. As such each of the three states of our network are self-stabilizing.

A general tri-stable toggle


Our implementation uses the pLac, pTet, and pBad/AraC promoters and their respective inhibiting proteins. We chose these because of the relative ease with which each promoter is induced: by adding IPTG for the pLac-promoted region, tetracycline for the PTet-promoted region, and arabinose for the pBad/Ara genes. By characterizing each of the three pathways without following genes and terminators, we enable a tri-stable switching network of any three biobricks to be constructed with minimal cloning.

Our implementation




Link to tri-stable switch on the registry:[http://partsregistry.org/Part:BBa_J24672 Tri-stable Switch]



Modeling the tri-stable toggle switch

While the tri-stable switch is seemingly simple in design, just like any other system it is subject to potentially comprising factors such as promoter leakiness and other stochastic fluctuations. In an attempt to predict the behavior of the tri-stable switch, we created a deterministic model of the system taking into account these factors. The model structure is based on that described in "Prediction and measurement of an autoregulatory genetic module" by Farren Isaacs, et al. This paper features an excellent supplement that takes you hand-in-hand through the derivation of model equations. I will attempt to emulate this derivation with our model below. It is important to note that while we have some preliminary results, our model is very much a work in progress. In order to model the system accurately, many of the fundamental constants governing the model will need to be determined experimentally. For now we have used some constants from the literature and estimated some based on similar the values of similar constants also from the literature.

Derivation of the Model Equations

Derivation of the Model Equations

Table of preliminary model constants

Table of preliminary model constants

Preliminary modeling results

The preliminary modeling results predict things about of the the tri-stable switch. First of all, the model confirms certain obvious points such as the a shift to the proper steady expression state in the presence of inducers. This prediction attests to model validity more than anything else. Secondly, the model predicts that the switch will reach a natural steady state with one promoter dominating in the absence of inducers. This makes intuitive sense as the individual promoters will most likely have different strengths.

No inducer.png

Next we tested the stability of the model by plugging in final steady-state induced levels of protein into an inducer-less system. The model predicts that the system will not remain stable and will instead revert back to the natural steady state for the inducer-less system. Even after changing several model parameters, the switch would not remain stable.


Stability test1.png

As a test of the model, models of the three potential bi-stable switches (already proven to be successful experimentally) using the same components and parameters were tested. In accordance with the literature, each of these constructs maintained stable expression of the induced state following the removal of the inducer. In order to probe the instability of the tri-stable switch further, tri-stable switches in which all of the components were effectively the same were created (ex:for all LacI-like, TetR and AraC were modeled as forming tetramers and having one operator.) Each of these systems reached a steady state in which all of the proteins evolved identically and were present at the same levels in the absence of inducer. The same stability tests were then performed. All of the constructs remained stable. Thus our model suggests that the similarity of the repressor-expression systems dominates the success or failure of the tri-stable switch. Furthermore, the bi-stable switch is less sensitive to this factor.

It should be noted that this is only a preliminary model. The values obtained from the literature will most like differ in our system. Through future experimentation we will elucidate these values and thus create a more accurate model. We will also conduct parameter scans aimed to provide further insight into the necessary system requirements for "tri-stability."



Link to MATLAB code for tri-stable model Media:tristable1.txt

Note: copy this code into MATLAB and save as an M-file

What we achieved

A successfully ligated pBad/arac construct in addition to partially completed ligations for the pLacI and the pTetR constructs were the results of our summer and semesters' work. The tri-stable toggle switch system was also modeled and proved to yield significant findings.

Challenges

Despite many cloning and ligation attempts, we were unable to create each component of the switch. More specifically, the pLacI and the pTetR circuits presented many ligation difficulties and proved to yield unsuccessful cloning. However, the pBAD/araC circuit was successfully constructed (yay!).

Conclusions

With the bigger picture in mind,this project yielded many successful outcomes.Firstly, we were able to successfully construct one of the three constructs necessary for a fully functional tri-stable toggle switch. Secondly, we were able to add more working parts to the registry, both a fully functioning pBad/AraC construct and many parts that were successfully ligated in the process of assembling the other two constructs. These parts will be used in the future by our team and perhaps many others as new ideas and projects develop. Also, it is necessary to mention our most recent finding from the modeling results for the tri-stable toggle switch. Interestingly enough, our model suggests that it is biologically unfeasible to create a switch with more than two components. If more than two components are introduced, such as three, the system is unable to maintain any one state and it will revert back to expressing its most dominant promoter construct. We find such results quite meaningful in demonstrating the biological limits of a system under study.

Future work

In the coming months, it is hoped that the failure of the ligation strategies for the pLacI and the pTetR constructs can be further investigated. We feel confident that we can continue to build from the one successful construction,the pBad/Arac construct and complete the other 2 constructs. To this end, it will be necessary to further troubleshoot the possible reasons why the cloning of the ligations were unsuccessful. Also we plan to conduct various experiments to elucidate more accurate model parameters specific to our system. Furthermore we will perform a parameter scan to investigate the determinates of "tri-stability."

Personal tools
Past/present/future years