EdinburghModeling

From 2006.igem.org

Revision as of 11:50, 29 October 2006 by Caiyizhi (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

System Diagram of Arsenic Biosensor

Click here[http://2006.igem.org/Image:Modeling_the_Arsenic_Biosensor_System.pdf] to download the PDF version of modelling report

Abstract

This section reports the modeling progress of an arsenic biosensor system, which is the iGEM project accomplished in the University of Edinburgh 2006. The arsenic biosensor system sought to address the fatal water pollution problem occurring in many poor countries/areas like Bangladesh by producing a calibratable pH changes in response to a range of arsenic concentrations. A computational model which contains 3 operons, 19 reactions and 17 species has been constructed to shed light on the wet-lab experimental design. By analyzing the sensitivity of each parameter/species, we identified their relative importance in the system which gives the theoretical guide when measuring the variable in wet-lab. The next step research is to refine the model by comparing it with the biological output.

Reaction set

No.	Name	Equation	Rate Law	Parameters
1	ArsD binding to Arsenic (III)	ArsD+2As(III)=ArsD-2As(III)	Mass Action	K1=1000 K-1=0.65
2	ArsD binding to promoter1	2 ArsD+promoter1=2ArsD-promoter1	Mass Action	K2=10000, K-2=0.65
3	ArsD degradation	ArsD->null	Mass Action	K3=0.05
4	ArsD production	promoter1->promoter1+ArsD	Michaelis-Menten	V4m=0.5, K4m=75
5	ArsR binding to Arsenic (III)	ArsR+2As(III)=ArsR-2As(III)	Mass Action	K5=1000, K-5=0.65
6	ArsR binding to promoter2	2ArsR+promoter2=2ArsR-promoter2	Mass Action	K6=10000, K-6=0.65
7	ArsR degradation	ArsR->null	Mass Action	K7=0.05
8	ArsR production	promoter2->promoter2+ArsR	Michaelis-Menten	V8m=10, K8m=25
9	LacI binding to allolactose	LacI+allolactose=LacI-allolactose	Mass Action	K9=10000, K-9=0.1
10	LacI binding to promoter4	LacI+promoter4 = LacI-promoter4	Mass Action	K10=1000, K-10=0.5
11	LacI degradation	LacI->null	Mass Action	K11=0.1
12	LacI production	promoter3->promoter3+LacI	Michaelis-Menten	V12m=0.5, K12m=40
13	lacZ degradation	lacZ->null	Mass Action	K13=0.1
14	lacZ production	promoter1->promoter1+lacZ	Michaelis-Menten	V14m=25, K14m=10
15	LCI binding to promoter 4	LCI+promoter4=LCI-promoter4	Mass Action	K15=10000, K-15=0.5
16	LCI degradation	LCI->null	Mass Action	K16=0.1
17	LCI production	promoter2->promoter2+LCI	Michaelis-Menten	V17m=10, K17m=25
18	Urease degradation	Urease->null	Mass Action	K18=0.1
19	Urease production	promoter4->promoter4+Urease	Michaelis-Menten	V19m=10, K19m=40

Note: The units for first, second and third order rate constants are expressed in units of second^-1, nMol^-1*second^-1 and nMol^-2*second^-1 respectively.

This reaction map is generated from the reaction set above using Simbiology Toolbox.

Initial concentration

No.	Species	Intial Concentration (nMol)
1	ArsD	25
2	As(III)	40
3	2ArsD-promoter1	25
4	promoter1	5
5	ArsR	25
6	2ArsR-promoter2	25
7	promoter2	5
8	LCI	4
9	LacI	0.1
10	LacI-allolactose	0.1
11	allolactose	1000
12	LacI-promoter4	0.1
13	promoter4	25
14	LCI-promoter4	0.1
15	Urease	0.1
16	promoter3	5
17	Other species	0

Methodology

Software used

In order to model the quantitative behavior of the dynamic system, many modeling software systems have been developed in the past few years. In this project, three kinds of software systems are used for modeling. This section introduces their functions and features.

1.System biology toolbox for Matlab: SimBiology toolbox provides functions for modeling, simulating, and analyzing biochemical pathways on basis of the powerful computing engine of Matlab. Aside from the conventional typing reaction equation, SimBiology provides a user-friendly ‘dragging-and-dropping’ block diagram editor to build a new model. Thanks to the powerful computing ability of Matlab, SimBiology integrates a wide range of numerical solvers for both stochastic and deterministic simulations. Another strength of SimBiology is its analyzing ability which includes sensitivity analysis, parameter estimation and conservation of moieties. Last but not the least, SimBiology provides user-defined plotting function which was widely used in this research project. However SimBiology is commercial software, it costs the budgeted researchers extra expense to purchase the license for this toolbox. Also, there is no GUI for sensitivity analysis and parameters scan functions, so users should obtain the skill of programming with Matlab.

2.BIOCHAM: BIOCHAM stands for biochemical abstract machine which is a formal modeling environment for system biology. Because of its rule-based language and temporal logic based language, BIOCHAM can offer an automatically reasoning tool for querying the temporal properties of the system under all its possible behaviors. It is very useful for constructing models especially when numerical data is unavailable. BIOCHAM also provides a state-of-the-art symbolic model checker for handling the complexity of large highly non-deterministic models. Furthermore, it provides simulation results via its graphical interface. One disadvantage of BIOCHAM is that because it is initially developed under UNIX, it uses command line rather than GUI to build new models, requiring users to write scripts by hand. Another problem was that when transplanting the program from UNIX to Windows, the model checker of NuSMV does not work well. So this project used BIOCHAM in Fedora 5 rather than Windows XP.

3. COPASI: COPASI is freeware developed with collaboration of VBI and EMLR. It provides almost the same functions as SimBiology, though not quite powerful. But compared with SimBiology, it provides a friendly user interface for model analysis, such as parameter estimation, and parameter scan. But there is no parameters/species sensitivity analysis function in COPASI, and also it is not very stable in use, crashing without any responses.

To sum up, each software has its own pros and cons. A good strategy is to apply them for different purposes, for example, using SimBiology to analyze the sensitivity of the model, and using COPASI to scan the most sensitive parameters. When logical queries are needed, BIOCHAM should be the first choice. SimBiology is suitable for generating professional plots, however due to the license requirement, COPASI can be the alternative choice to to run simulations and export the results to such plotting software as SigmaPlot.

Results

System response

Fig.1 System response with 5ppb arsenic input

Fig.2 System response with 20ppb arsenic input

Parameter sensitivity analysis

Fig.3 Sensitivity of lacZ with Respect to Model Parameters 1-16

Fig.4 Sensitivity of lacZ with Respect to Model Parameters 17-32

The most sensitive parameters affecting lacZ

Nanme	Description	Peak value of sensitivity	Normal value
K-1	ArsD-2AS(III) dissociate rate	-2	0.65/s
K-2	2ArsD-promoter1 dissociate rate	4	0.65/s
K3	ArsD degradation rate	90	0.05/s
K7	ArsR degradation rate	12	0.05/s
K13	LacZ degradation rate	-35	0.1/s

Fig.5 Varying the Value of Parameter K-1 effect on lacZ

Fig.5 Varying the Value of Parameter K-1 effect on lacZ (3D)

Fig.5 Varying the Value of Parameter K-2 effect on lacZ

Fig.5 Varying the Value of Parameter K3 effect on lacZ

Fig.5 Varying the Value of Parameter K7 effect on lacZ

Fig.5 Varying the Value of Parameter K13 effect on lacZ

Fig.5 Sensitivity of Urease with Respect to Model Parameters 1-16

Fig.6 Sensitivity of Urease with Respect to Model Parameters 17-32

The most sensitive parameters affecting Urease

Nanme	Description	Peak value of sensitivity	Normal value
k3	ArsD degradation rate	-30	0.05/s
k-6	2ArsR-promoter2 dissociate rate	-5	0.65/s
k7	ArsR degradation rate	-120	0.05/s
K18	Urease degradation rate	-350	0.1/s
V19m	Urease production maxium rate	3.5	10 nMol/s