Construction

From 2006.igem.org

Revision as of 08:06, 2 November 2006 by Chuck (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

October 27, 2006

Charles, Nick: - M9 Test – 0% - 2% Arabinose in UT3 and DH5a (control), temperature test at 0.2% Arabinose, IPTG verification at 0% and 2% arabinose:

   - Dilute o/n of UT3 and DH5a in 1:50 o/n to LB ratio in appropriate arabinose/IPTG concentrations      
     – incubate 3 hrs
   - Resuspend in 50:50 M9:LB (including arabinose/IPTG) and divided 0.2% arabinose for temperature 
     test – incubate for 3 hrs
   - Resuspend in M9 media – incubate for 5 hrs
       - First 3 hrs without signalling conditions, then latter 2 hrs with conditions
   - Read with fluorometer (PBS wash not required)

- Ligated I0500 B (2005) + I13507 (2005) / I13504 (2005/2006) - Made o/n of UT9, UT10, UT11 ABC - Made o/n of DH5a and DH5a-z1

To-Do List: - Check lengths of I0500 (2006), Q04400 (2005/2006), Q03400 (2006) - Miniprep and check lengths of UT9, UT10, UT11 – if correct, wait for functionality test before transforming into cells - Make competent cells (DH5a and DH5a-z1) - Make Amp and Kan plates

October 26, 2006

Andy, Natalie, Charles, Tara, HoKwon:

Ligated and transformed UT6, UT7 with I13504 (2005/2006) (Name UT10, UT11) (Quantitation showed correct band for all)
Ligated and transformed R0011 (2005) with I13507 (2005) (Name UT9) (Quantitation showed correct band for all)
Made o/n of UT3 x 3, DH5a for testing
Quantitated I0500 (2005) AB to be ligated to I13504 (2005/2006) (Band: 6000 - roughly correct. A 20 ng/uL B 300 ng/uL)

To-do list:

Make o/n of UT9, UT10, UT11 for miniprep
Ligate I0500 (2005) with I13504 (2005/2006)
M9 testing of UT3

October 25, 2006

Andy:

Minipreppred UT6, UT7, UT8
Gel-extracted (only for correct bands)
- UT6 S/P (band: 8000-10000 correct) -- 80 ng/uL
- UT7 S/P (band: 8000-10000 correct) -- 50 ng/uL
- UT8 S/P (band: 6000 incorrect)
- I13504 (2005) X/P (band: 750-1000, 1500-2000 correct) -- 140 ng/uL
- I13504 (2006) X/P (band: 750-1000, 1500-2000 correct) -- 90 ng/uL
Made o/n of UT2 x 3, UT3 x 3, DH5a for testing

To-do list:

Quantitate and ligate UT6, UT7 with I13504 (2005/2006)
Quantitate and ligate R0011 (2005) with I13507 (2005)
M9 testing of UT2, UT3

October 24, 2006

Melinda:

Minipreppred and length-checked (unsuccessful) I13522 (2006), I13504 (2005/2006) AB, R0011 (2005)
Made o/n of UT6-8 for miniprep

October 23, 2006

Andy:

Gel-extrated I13507 (2005) X/P
Made o/n of I13522 (2006), I13504 (2005/2006) x 2, R0011 (2005) for minipreps
Tested UT3 for temperature and arabinose sensitivity, plated UT2, UT3, DH5a for plate test
Made plates
ligated and transformed UT1 with Q4400 (2005) = UT6, Q3400 (2006) = UT7, and Q4400 (2006) = UT8

To-do List:

Quantitate and Ligate R0011 (2005) with I13507 (2005)
Miniprep and length-check I13522 (2006), I13504 (2005/2006) x 2, R0011 (2005)
Make multiple o/n of UT6-8 for miniprep

October 22, 2006

Massive To-do List

The following is a guideline. Day-to-day details need to be filled in as we progress. Change colors from red to black as each task is completed.

Construction:

Transform and miniprep I13522 (2006) (amp) from registry DNA-2 15H
Transform and miniprep I13504 (2005/2006) (amp) from registry DNA-1 12D (2005/2006)
Miniprep 2 UT1 for ligation (not urgent)
Ligate UT1 with Q03400, Q04400 (2005/2006) (4 ligations) (Name UT6-9)
If possible, ligate R0011 (2005) with I13507 (2005) in parallel (Name UT10)
Ligate UT6-9 with I13504 (4 ligations) (Name UT11-14)
Ligate UT11-14 with UT10 (4 ligations) (Nam UT15-18)

Testing:

Temperature-test and Arabinose/IPTG-test UT3 (See below for protocol)
Plate-test UT2, UT3, DH5a, UT13, I13522 (See below for protocol)

Andy:

Gel-extrated R0011 (2005) S/P (band: 2000 - correct)
Cannot gel-extract I13507 (2005) X/P because there was no more extraction column (bands: 2500-3000, 2000-2500, 750-1000 - correct)
Transformed R0011 (2005), I13522 (2006), I13504 (2005/2006)
Quantitated
- Q3400 (2005) E/X (no band)
- Q4400 (2005) E/X (band: 5000 - correct 120 ng/uL)
- Q3400 (2006) E/X (band: 5000 - correct 24 ng/uL)
- Q4400 (2006) E/X (band: 5000 - correct 120 ng/uL)
- UT1 D E/S (band: 2500-3000 - correct 18 ng/uL)
- UT1 E E/S (band: 2500-3000 - correct 12 ng/uL)
- UT1 F E/S (band: 2500-3000 - correct 30 ng/uL)
o/n of UT3 x 5, UT2 x 1, and DH5a x 4 for temperature, arabinose, and plate testing

To-do List:

Ligate UT1 with Q3400 (2006), Q4400 (2005/2006)
Make o/n of I13522 (2006) for miniprep and plate-test, I13504 (2005/2006), I13507 (2005) for miniprep
Gel-extract I13507 (2005) X/P
Temperature, arabinose, and plate testing
Purchase gel-extraction kit, make Amp plates

Guidelines for Plate-test:

On an Amp plate, make 4 sectors (500 uL?) with varying arabinose (0.02%, 0.2%, 2%, 20%) and making sure they don’t touch each other (otherwise diffusion will happen and they’ll be the same concentration), let the arabinose area dry.
Take o/n of UT3-DH5a and take out 200 uL and add 800 uL of fresh LB and incubate for 1 hr.
Spin down the cells at 3000 RPM for 5 min and remove 800 uL of supernatant. Resuspend cells with the remaining 200 uL and gently spread onto plate

Guidelines for Temperature-test:

Put a constant amount of arabinose (either 0.02% or 0.2% - don’t want TOO much repression) in each dilution.
Grow dilutions at 37C until the absorbance is ~0.6 using the GFP ABS program. Then take some tubes out and put 1 mL into an Eppendorf tube.
Use the white filter caps and put them on each Eppendorf tube (to allow air in, but to protect against contamination)
Set mixer to the equivalent to the shaker in the incubator (remember it’s a smaller tube, so there probably needs to be more force on it to get it to shake).
Set temperature to 22C
Check the absorbance after a couple of hours and prepare the samples when the absorbance matches the absorbance of the tubs in the incubator (these should be ready before the 22C ones are ready)
Hopefully we’ll see a significant difference in fluorescence: cold should fluoresce less than hot.