ETH Zurich 2006

From 2006.igem.org

standing (L-R): Marco, Alexandra, Arthur, Olga, Dimo, Marko, Robert; in front (L-R):

Franz, Michael

Adding numbers is easy, isn't it? 1234 plus 5678, for example, is 6912. But how do engineers add binary numbers instead of decimal ones? And how, in the end, can this be done by a living cell? We, the members of the ETH Zurich 2006 iGEM team, are currently working on these questions, whereas the last one seems to be not trivial.

What the addition of numbers has to do with pattern recognition, how our model and the mathematical analysis look like, and how the experiments are realized will be explained on these wiki pages. We wish you a pleasant time with our pages. Enjoy it!

Contents 1 Coordination 1.1 TODOs 1.1.1 Modeling 1.1.2 Lab 1.1.3 Documentation 1.1.4 Presentation/Poster and PR 1.2 Schedule 1.3 Participants and availability 2 Finding a Project 3 design process 3.1 system behavorial specification 3.2 system structure 3.3 system modeling 3.3.1 modular simulation 3.3.2 parameter estimation & sensitivity analysis 3.3.3 the role of modeling 3.3.4 modular scripts 3.4 system deployment 3.5 system assembly procedure 3.6 system test procedure 4 Useful Documents & Links

Coordination

TODOs

Modeling

• Parts Model the whole System with Sensing, Pops duplexer and Half adder (Marco and Franz) -- probably not
• Model whether a different strength of input is necessary for the AND and XOR Gates (Marco)
• Finish modeling the second AND Gate and find a biological way to implement it and write the DNA and order it (Marco and Robert) -- probably not
• Bring model parameter up to date & update simulation results/senisitivity analysis (Marco)

Lab

Responsible: Robert for the preparatory experiments, Olga for the assembly and testing of the gates.

• Read the literature on the XOR and AND Gates, check carefully for strains needed and compatibility of the parts (Who?)
• Prepare a protocol for parts assembly (Olga)
• Assembly of the chemical sensing device (Franz, Dimo, Robert, Marco, Marko, Olga) DONE
• Test chemical sensing device DONE?

Documentation

Responsible: Alexandra for the registry, Arthur for the Wiki.

• enter lab experience report to registry
• Make a drawing of the DNA to have an overview of which parts will be consecutively on the same DNA piece (Alexandra) (this is part of the #system deployment section --Ajk)
• Revise images & graphics (Marco):
  • correct errors
  • unify symbols
  • extract missing ones from slides, see here

Presentation/Poster and PR

Responsible: Franz for the presentation, Dimo for PR/Poster

• design and write the final presentation (with LaTex beamer class) IN PROCESS
• draw a team logo and find a team name (Franz and Dimo)
• design and order T-Shirts (Dimo)
• setup poster (Dimo), collect info/distribute tasks

Structure:

1. Introduction of the team and ETH Zurich and of the half-adder idea - about 3 min

2. Engineering Part - about 9 min

3. Biological part - about 8 min

(4.) Questions from the audience - 10min (I think, Marco (modelling) and Marko (biology) should also be ready to answer questions)

Schedule

Available as Google Calendar: [http://www.google.com/calendar/render?cid=pqi8ni6gnfj5r3o0np0h4smrr4@group.calendar.google.com iGEM 2006 ETH Zurich]

past

see here

30.10.

Project documentation on the Wiki has to be complete

4./5.11.

Jamboree in Boston

Participants and availability

• Michael Friedmann:
• Dimo Brockhoff:
• Franz Zürcher:
• Olga Nikolayeva:
• Alexandra Choutko:
• Arthur Korn:
• Robert Schütz:
• Marco Terzer:
• Marko Jovanovic:

Finding a Project

Finding a project to work on is not easy. Not because it is hard to find interesting projects but because there are too many of them. In the first weeks we did a lot of brainstorming including thoughts about the projects' feasibility. You can find a list of ideas here.

During the weeks, we decided to split up the whole team into two groups. Each group proposed a project after these two weeks of separated work:

• Meat monitor project (Michael, Dimo, Olga, Arthur, Marko)
• Half adder/pattern recognition project (Franz, Alexandra, Robert, Marco)

After the proposals, we decided to further pursue the half adder project idea.

design process

system behavorial specification

1. Write something with a chemical on a petri plate (like ETH for example)
2. Let Bacteria grow uniformly on the plate
3. Expose the plate to a picture (black and white) of the same pattern
4. Result:
   • Bacteria gets green when pattern on the plate and picture match (light and chemical)
   • Bacteria does not express fluorescent protein when pattern on the plate and picture match (no light and no chemical)
   • Bacteria gets red when pattern on the plate and picture do not match

           light   no light
chemical     A         B
no chemical  B         C

The outputs can be reported by fluorescent proteins, the mapping of states to outputs is arbitary, our choice is:

A: green
B: red
C: no fluorescence

An experiment in the lab could for instance look like this

or like this

Considering the green and the red output as being separate, the logic mapping the input states to the output states is AND for the GFP and XOR for the RFP. Together they amount to a half adder logic.

The whole system is only considered at it's steady state, dynamic processes are only of minor interest.

system structure

The whole process can be brought into a common input, logic, output form:

[light sensing]----->[       ]-->[reporter A]
                     [ logic ]
[chemical sensing]-->[       ]-->[reporter B]

As it turns out, a [http://en.wikipedia.org/wiki/Full_adder half-adder] can be used as logic part. A half adder can add 2 binary values and thus has 2 inputs. It has also 2 outputs, the sum value S and a carry out C (If an n-bit adder is conststructed from half adders, the carry out of the lower significant bit has to be carried over to the next position).

A half adder can be constructed from an XOR gate (the sum value S) and an AND gate (the carry out):

   A               A
   ^               ^
  1| 1 0         1 | 0 1
  0| 0 1         0 | 0 0
   +-----> B       +----> B
     0 1             0 1

  S = A XOR B    C = A AND B

For our purposes, sum output S and carry out C are exactly the values we desire for our system. the system architecture looks then like the following:

• xor gate
• and gate
• iptg (chemical) sensing
• light sensing
• pops duplexer

system modeling

according to the system structure, we first decompose our overall system into devices:

• xor gate
• and gate
• iptg (chemical) sensing
• light sensing
• pops duplexer

for every device, we define the set of ode's (ordinary differential equations) to model the dynamic behavior. our interest is mainly the resulting steady state i.e. when the system reaches equilibra for the concerned species. this means that production and concumption rates are balanced for encymes, metabolites, mRNA etc.

modular simulation

modular modeling allows simulation at different detail levels, e.g.

• single devices, different variants of same device type, as a basis of decisionmaking
• reusable complexes reoccurring in different devices, like
  • transcription
  • translation
  • encymatic reactions
• 2 or several connected devices → for instance to see which duplexer variant fits better with which AND/XOR gate variant
• overall system → to see if everything together still works

we have developed such a modular system in matlab:

• the current implementation defines modules at device level (reusable complexes is a pending issue)
• modules mainly are characterized by number/kind of input and output and can be simulated with an appropriate simulation function
• input/output kind: we destiguish between concentration and rate (PoPS)
• the modules have 1-2 inputs/ouptus, for instance 2 inputs/1 ouptut for AND/XOR gate

parameter estimation & sensitivity analysis

it is known, and we have made the same (sometimes painful) experience that parameter estimation is the most difficult and laborious part on modeling. most parameters are simply not known, and finding an at least roughly appropriate value sometimes approaches playing dice.

one way to address this problem is sensitivity analysis: if we change some parameter, what effect has it on the behavior of the model? we therefore perturbed all parameters and observed the change of the module output. the sensitivity matrix S at steady state can be computed with the jacobian matrices of the ode's with respect to the states (concentrations) and parameters. To be able to compare the results, parameter values are normalized, that is, parameter changes are relative to the assumed parameter value.

sensitivity analysis enables to determine:

• if our model resembles the desired behavior
• unnecessary parameters (can be eliminated)
• contribution of parameters to output behavior (which are the most sensitive parameters)
• validation of expected sensitivity, e.g.
  • changing the second input of the AND gate if the first is low should have little influence (and thus low sensitivity)
  • correlations: if sensitivity on input is low, parameters correlating with (acting on) the input should be low, too

the role of modeling

with all the uncertainties and difficulties (such as parameter estimation) the question might raise whether modeling is worthwile at all. we definitely think so, but one has to think of modeling as an integrated process. it should not be seen as a precursor phase of experiment and synthesis, it is part of the knowledge cycle.

after brainstorming and idea selection, we started with abstract models of the necessary devices on a very schematic level. for instance, we came up with different theoretical models for the XOR and AND gates - without considering biology too much at this early stage. then, we looked for biological systems which could fit one of our models - literature research was to some extent model driven. we refined the remaining models and simulated the devices for the first time - here, the ode's and matlab joined in. these models helped a lot in deciding which gate variants should be given the preference. but with additional knowledge and key figures about the biological system, the models where constantly adapted.

important is the interaction of model and experiments: what tests/experiments should be done with the synthesized devices? of course, one wants to know wheter it works or not - but what's next? if a certain device does not work as expected, what should we change? here, models and especially sensitivity analysis provide valuable information for experiment planning, for instance it might tell you that increasing the concentration of the input chemical has less influence than reducing the half life time of some proteine. and with the experiments, you gather data about your system, triggering again validation and refinement of the models.

modular scripts

Each file contains a createXXX() script for the device it contains. The created program object contains:

• function handles for reaction rates: r
• stoichiometric matrix: N
• constants (inside of the function handles)
• state (concentration) changes (the ode dy values) can be computed by: N · r

The modules can then be "connected" using the createInOutConnector() function. The result is again a device object, consisting of the connected basic device objects. sim_1_1 and sim_1_2 can be used to simulate devices with 1 input/1 output and 1 input/2 outputs respectively, both basic and composite devices.

simulations contains the first examples, simulating

• XOR → simulation results / sensitivity analysis
• AND-tRNA → simulation results / sensitivity analysis
• IPTG Sensing →simulation results
• PoPS Duplexer →simulation results
• Compound module: IPTG Sensing → PoPS Duplexer →simulation results

All scripts: [http://csb.inf.ethz.ch/igem-2006/matlab_modules.zip matlab_modules.zip] (<0.1M)

OldScripts

system deployment

distribution on the plasmids, strains

system assembly procedure

to be done

system test procedure

Useful Documents & Links

see here