Brown:Tri-Stable toggle switch

From 2006.igem.org

Revision as of 01:00, 31 October 2006 by Victorialattanzi (Talk | contribs)
Jump to: navigation, search
CSAIL logo

Home        People        Research        iGEM Proposal        Coming to Brown?        Contact        Projects              

Contents

A tri-stable toggle switch

Pursuant to the the 1999 paper "Construction of a genetic toggle switch in Escherichia coli," by Timothy S. Gardner, Charles R. Cantor and James J. Collins, we wondered if the bi-stable toggle switch could be generalized to an n-stable switch. To that end, we conceived and began construction of the tri-stable toggle switch. The general idea is that when a selected promoter is activated, it represses the other two. As such each of the three states of our network are self-stabilizing.

A general tri-stable toggle

Our implementation uses the pLac, pTet, and pBad/AraC promoters and their respective inhibiting proteins. We chose these because of the relative ease with which each promoter is induced: by adding IPTG for the pLac-promoted region, tetracycline for the PTet-promoted region, and arabinose for the pBad/Ara genes. By characterizing each of the three pathways without following genes and terminators, we enable a tri-stable switching network of any three biobricks to be constructed with minimal cloning.

Our implementation





Modeling the tri-stable toggle switch

While the tri-stable switch is seemingly simple in design, just like any other system it is subject to potentially comprising factors such as promoter leakiness and other stochastic fluctuations. In an attempt to predict the behavior of the tri-stable switch, we created a deterministic model of the system taking into account these factors. The model structure is based on that described in "Prediction and measurement of an autoregulatory genetic module" by Farren Isaacs, et al. This paper features an excellent supplement that takes you hand-in-hand through the derivation of model equations. I will attempt to emulate this derivation with our model below. It is important to note that while we have some preliminary results, our model is very much a work in progress. In order to model the system accurately, many of the fundamental constants governing the model will need to be determined experimentally. For now we have used some constants from the literature and estimated some based on similar the values of similar constants also from the literature.

Derivation of the Model Equations

The chemical reactions describing the tri-stable switch can be divided into the two catagories of fast and slow reactions. Fast reactions such as dimer formation and promoter-binding occur in the scale of seconds and are therefore modeled to be in equilibrium. Conversely, slow reactions including the likes of transcription, translation, and protein degradation occur on the scale of minutes and are thus modeled to be evolving with time.

Fast reversible reaction equations

The following equations (1) describe the fast reactions. The characters L,T,A denote molecules of LacI, TetR, and, AraC, respectively while the subscripts denote whether the molecule is a monomer (blank), dimer(2), tri-mer(3), etc. The k's denote reaction rates.

Fast rxn eqs1.png

Note that the equations include volume explicitly. Cell volume is modeled in this way as it is a slowly evolving function of time.

Slow irreversible reaction equations

The following equations (2) describe the slow irreversible reactions of transcription and translation (both taken into account with the reaction rate kti) and protein degradation (reaction constant kdi). The coefficients eta-ij take into account the relative translation rates of proteins from the same transcripts. For eta-ij, "i" represents the promoter responsible for producing the molecule and "j" represents the molecule being translated [ex: eta-LA corresponds to the relative rate of AraC production from the trascript produced by the LacI promoter]. To establish a convention, eta's are relative to the translation rate of the first gene on a particular transcript. Thus eta for the first gene on the mRNA transcript = 1. The alpha-i coefficients represent relative transcription rates. In this case, "i" denotes the promoter from which the mRNA is transcribed.

Slow rxn eqs.png

Equations governing cell volume

The following two equations (3) describing cellular growth and division are taken directly from the aforementioned paper by Isaacs et al. The first equation describes the volume increase from the time immediately following cell division to the time immediately before it. In this equation, V0 denotes the volume of the cell at the beginning of growth and T0 denotes the time of cell division. In our model at times T=q*t0 in which q is an integer, we have volume V and protein concentration n halve - thus modeling volume division and the resulting protein redistribution. The second equation describes the dimensionless equation in which t is measured in terms of fcell-division time and the cell volume changes between 1 and 2.

Vol eq.png

Equations for the total number of molecules

The following equations (4) describe the total number of inhibitor protein molecules zi. d#i represents the number, "#", of molecules bound to the "i" promoter. (ex: all of the LacI tetramers bound to pLacI promoters are accounted for by the 4d1L term.) Tot mol eq.png

Equations describing the temporal evolution of the total number inhibitor molecules

The following equations (5) describe the temporal evolution of the total number of inhibitor molecules. Beta-i = the cell division time multiplied by the combined transcription and tranlation rates from a given promoter "i" (t0*kti), thus representing the total number of protein molecules maximally produced by a given promoter. Similarly, Gamma-i = the cell division time multipled by the degradation rate of protein i (t0*kdi), thus representing the total number of protein i destabilized over one cell division time. The eta and alpha terms are described in the section above describing the equations for the slow reactions. Note that the equation describing the temporal evolution of AraC includes the term "Aend." This term represents the endogenous expression of AraC in dH5alpha's. Our preliminary work suggests that this endogenous AraC has very little effect on our pBad promoter.

Ev tot mol eqs.png

Fast reaction equilibrium equations

Compared to the slowly evolving reactions(2) described by the above equations (5), the fast reactions (1) can be considered to be in equilibrium. Thus the following equilibrium relations (6) hold. Fast eq eqs.png

Equations modeling the presence of the inducers

The following equations (7) model the effect of the chemical inducers on the system. The model regards the proteins bound to the inducers as having increased dissociation rates (ki-#) as specified below. The reation rate with the apostrophe denotes the original reaction rate in the absence of inducer inclusion. In these equations "I" denotes IPTG, "a" denotes arabinose, and "Tc" denotes tetracycline (or analogue aTc). The concept for and the form of these equations are based on equations described in the supplementary Information for "A bottom-up approach to gene regulation" by Guido et al. Much like the aforementioned paper by Isaacs et al., 'Bottom-up' has an extensive and brilliantly articulate derviation supplement.

Inducer eqs.png

Equations relating plasmid copy number to operator sites

The following equations (8) relate the plasmid copy number, "m", to the number of promoters with bound and unbound operators. As each plasmid contains 1 of each promoter, m is constant for all three promoter types.

Cop num eqs.png

Simplified fast reaction equilibrium equations

The equilibrium equations governing the fast reactions (6) can be simplified by defining dimensionless equilibrium constants in the form of cij=kij/(k(-ij)*V0*A) in which A is Avogadro's number. The cL's are further simplified by defining the constant cL=c1L*c2L*c3L*c4L. Additionally by plugging in successive terms we were able to write the operator equations in terms of d0L.

Simp fast eq eqs.png

Equations for the number of unbound operators

Combining equations (8) and the above simplified equilibrium equations(9), we are able to solve for the number of unbound operators d0i.

Unbound eqs.png

Equations for the number of bound operators

By plugging the d0i's (10) back into the equations for bound operators (9), we can solve for these equations in terms of monomer concentrations.


Bound eqs.png

Equation manipulations to determine change in protein monomers per time

Next we can rewrite the equations describing the temporal evolution of the total number inhibitor molecules (5) in terms of equations (10) and (11). This yields the somewhat complex equations (12) which are solely in terms of monomer protein concentration.

Dzdt eqs.png

Equations for the change in protein monomers per time

By applying the simple mathematical manipulation (13) to equations (12) and the X derivative of equations (9) ((9) can be written in terms of X by plugging in equations (10) and (11)) we can solve for the following equations for the evolution of protein monomers as a function of time (14). I will spare you the dZi/dXi derivative equations of equation (9).

Simp mat man eq.png

Equations describing stochastic variation

Equations for the evolution of fluorescent reporters

Table of preliminary model constants

General Parameters

Parameter Value Meaning
m 20 Copies Plasmid Copy Number

Inhibitor Protein Parameters

Parameter Value Meaning
alphaT1 .01 Relative transcription level for repressed (1 TetR dimer bound) pTetR promoter
alphaT2 .01 Relative transcription level for doubly repressed (2 TetR dimers bound) pTetR promoter
alphaL .01 Relative transcription level for repressed (1 LacI tetramer bound) pLacI promoter
alphaA .01 Relative transcription level for repressed (two AraC monomers bound) pBAD promoter
betaA 1000 maximum number of proteins produced from the pBAD promoter per cell division
betaL 1000 maximum number of proteins produced from the pLacI promoter per cell division
betaT 1000 maximum number of proteins produced from the pTetR promoter per cell division
etaLT 1 Relative rate of TetR translation from pLacI promoter
etaLA 1 Relative rate of AraC translation from pLacI promoter
etaAL 1 Relative rate of LacI translation from pBAD promoter
etaAT 1 Relative rate of TetR translation from pBAD promoter
etaTL 1 Relative rate of LacI translation from pTetR promoter
etaTA 1 Relative rate of AraC translation from pTetR promoter
c1L .05 Equilibrium constant for LacI dimerization
c2L .05 Equilibrium constant for LacI trimerization
c3L .05 Equilibrium constant for LacI tetramerization
c4L .33 Equilibrium constant for LacI binding

Preliminary modeling results

Coming Soon...

Link to MATLAB code for tri-stable model Media:tristable1.m

--Jlohmuel 03:59, 28 October 2006 (EDT)

What we achieved

Challenges

Despite many cloning and ligation attempts, we were unable to create each component of the switch. More specifically the pLacI and the pTetR circuits presented many ligation difficulties and proved to yield unsucessful cloning. However, the pBAD/araC circuit was sucessfully constructed(yay!).

Conclusions

Future work

In the coming months, it is hoped the failure of the ligation strategies for two of the circuits can be further investigated. We feel confident that we can continue to build from the one compeletly successful contruction of the pBad/Arac circuit and complete the other 2 circuits. To this end, it will be necessary to further troubleshoot the possible reasons why the cloning of the ligations were unsucessful.

Personal tools
Past/present/future years