Harvard 2006
From 2006.igem.org
(→Cell surface streptavidin) |
(→Cell surface streptavidin) |
||
Line 112: | Line 112: | ||
**delivering a DNA nanobox to the cell surface through a biotinylated oligonucleotide. | **delivering a DNA nanobox to the cell surface through a biotinylated oligonucleotide. | ||
- | *Streptavidin would be expressed on the cell surface through the '''Lpp-OmpA surface display vehicle''' ( | + | *Streptavidin would be expressed on the cell surface through the '''Lpp-OmpA surface display vehicle''' (Earhart, 2000). The complete vehicle consists of three fused protein domains. |
**20-amino-acid signal peptide and the first 9 amino acids of lipoprotein (Lpp). This targets the protein to the outer membrane. | **20-amino-acid signal peptide and the first 9 amino acids of lipoprotein (Lpp). This targets the protein to the outer membrane. | ||
**Amino acids #46-66 (one transmembrane domain) or #46-159 (five transmembrane domains) of outer membrane protein A (OmpA). This spans the protein across the outer membrane to the cell surface. | **Amino acids #46-66 (one transmembrane domain) or #46-159 (five transmembrane domains) of outer membrane protein A (OmpA). This spans the protein across the outer membrane to the cell surface. | ||
Line 129: | Line 129: | ||
**J36835. Lpp, the lipoprotein signal peptide | **J36835. Lpp, the lipoprotein signal peptide | ||
**J36837 or J36838. OmpA, one (O1) or five (O5) transmembrane domains, respectively. | **J36837 or J36838. OmpA, one (O1) or five (O5) transmembrane domains, respectively. | ||
- | **J36841 or J36843. Streptavidin, either wild-type (SW) from | + | **J36841 or J36843. Streptavidin, either wild-type (SW) from the Ting lab at MIT or single-chain dimeric (SD) from the Cantor lab at BU. |
- | ***Streptavidin exists naturally as a soluble tetramer, but restriction to the surface might allow only monomeric/dimeric forms. What is interesting is that there has been research done to engineer soluble monomeric/dimeric streptavidin, in order to render biotin binding less strong but more easily reversible. It can be imagined that SW would be displayed on the surface as a monomer and SD, as a dimer. | + | ***Streptavidin exists naturally as a soluble tetramer, but restriction to the surface might allow only monomeric/dimeric forms. What is interesting is that there has been research done to engineer soluble monomeric/dimeric streptavidin, in order to render biotin binding less strong but more easily reversible (Wu, 2005). It can be imagined that SW would be displayed on the surface as a monomer and SD, as a dimer. |
***Both SW and SD include His6 tags at the ends of their amino acid sequences. | ***Both SW and SD include His6 tags at the ends of their amino acid sequences. | ||
*After transformation of these constructs into Top10F' cells and induction with IPTG, Western blots were performed with cell lysates, probing with anti-his6(C-term) antibody and with anti-streptavidin antibody. Distinct bands were observed at the expected sizes in anti-his6 probing, and bands were observed at the same places with the anti-streptavidin probing. These results suggest the following. | *After transformation of these constructs into Top10F' cells and induction with IPTG, Western blots were performed with cell lysates, probing with anti-his6(C-term) antibody and with anti-streptavidin antibody. Distinct bands were observed at the expected sizes in anti-his6 probing, and bands were observed at the same places with the anti-streptavidin probing. These results suggest the following. | ||
Line 149: | Line 149: | ||
'''Electronic Notebook''' | '''Electronic Notebook''' | ||
*[http://openwetware.org/wiki/IGEM:Harvard/2006/Fusion_proteins openwetware page] | *[http://openwetware.org/wiki/IGEM:Harvard/2006/Fusion_proteins openwetware page] | ||
+ | |||
+ | '''References''' | ||
+ | *Francisco JA, Earhart CF, and Georgiou G. Transport and anchoring of beta-lactamase to the external surface of Escherichia coli. Proc Natl Acad Sci U S A 1992 Apr 1; 89(7) 2713-7. | ||
+ | *Earhart CF. Use of an Lpp-OmpA fusion vehicle for bacterial surface display. Methods Enzymol 2000; 326 506-16. | ||
+ | *Aslan FM, Yu Y, Mohr SC, and Cantor CR. Engineered single-chain dimeric streptavidins with an unexpected strong preference for biotin-4-fluorescein. Proc Natl Acad Sci U S A 2005 Jun 14; 102(24) 8507-12. | ||
+ | *Wu SC and Wong SL. Engineering soluble monomeric streptavidin with reversible biotin binding capability. J Biol Chem 2005 Jun 17; 280(24) 23225-31. | ||
+ | *Howarth M, Chinnapen DJ, Gerrow K, Dorrestein PC, Grandy MR, Kelleher NL, El-Husseini A, and Ting AY. A monovalent streptavidin with a single femtomolar biotin binding site. Nat Methods 2006 Apr; 3(4) 267-73. | ||
==A Circadian Oscillator for E.coli== | ==A Circadian Oscillator for E.coli== |
Revision as of 06:51, 30 October 2006
Harvard University 2006 iGEM Team | ||
Students
|
Teaching Fellows
Faculty Advisors
|
The Harvard University 2006 iGEM Team
This year Harvard's team consisted of 10 undergraduate students, with backgrounds in molecular and cellular biology, biochemistry, and computer science. With the help of five faculty advisors and three graduate-level teaching advisors, they devised and executed three separate projects.
1. Construction of novel DNA nanostructures for the purpose of stealth drug delivery,
2. Exploration of cell surface targeting by using interchangable and linkable aptamers (adaptamers), and an Lpp-OmpA fusion protein for surface-displayed streptavidin.
3. Reconstitution of a circadian oscillator from cyanobacteria into E. coli,
DNA Nanobox: A Nanoscale Device for Stealth Drug Delivery
Project Overview
- Traditional drug delivery is fairly low-tech. Tablets containing a mixture of active small molecules and binders are ingested, and the small molecules circulate non-specifically throughout the body. Even when a specific cell or tissue type is targeted (e.g. cancerous cells or bacterial infections), many other tissues are exposed to the drugs, often with serious side effects. We envision a future in which medicines will be delivered in a highly specific manner to targeted tissues and cell types, and set out to make initial steps toward realizing this vision.
- Our goal for the summer was to design and implement nanoscale molecular containers, which could be dynamically opened and closed by an external stimulus. This is the first step to making more sophisticated drug-delivery vehicles.
- The containers were implemented as DNA nanostructures, which afford a significant degree of positional control and chemical versatility.
- To demonstrate that our designs successfully self-assembled, we used negative-stain electron microscopy to visualize the containers.
- As an initial proof-of-concept, we planned to demonstrate that our DNA containers could be used to "protect" biotinylated oligonucleotides from binding by streptavidin-coated magnetic beads.
- We were able to successfully show that nanoboxes with internal biotinylated oligonucleotides did not bind to streptavidin-coated magnetic beads, while nanoboxes that were externally decorated with biotinylated oligonucleotides were bound by the same beads.
Results
- The following images show our most successful container design, both as a 3D cartoon and in actual negative-stain EM images. The length, width, and depth of this container design is approximately 30x30x30 nanometers, so it is bigger than a typical ribosome.
- More details about this design can be found [http://openwetware.org/wiki/IGEM:Harvard/2006/Container_Design_5 here].
- The basic design of this container is a hexagonal barrel, closed off by two flat lids.
- The lids are designed to reversibly attach to the barrel using complementary oligonucleotides using a "toehold" strategy in which the strands include unpaired overhangs that can be displaced with the addition of oligos that match for the full length of the sequence.
Future Plans
- We have demonstrated the first steps toward building a sophisticated, versatile drug delivery vehicle out of DNA.
- Short term plans include assembly of closed containers (which include lids), and further characterization of assembled structures (both imaging and functional assays). We have not determined the maximum size for a molecule that can still diffuse between DNA helices that comprise our container, but for a closed container we expect it to be around 1 nanometer in diameter.
- In the long term, we envision designing containers that incorporate cell-surface targeting mechanisms that would allow delivery of a payload to a specific cell type. Advances also need to be made if the container is going to deliver small molecules - perhaps by encapsulating the container with a liposome (or vice versa).
Electronic Notebook
- [http://openwetware.org/wiki/IGEM:Harvard/2006/DNA_nanostructures openwetware page]
Cell Surface Targeting
Adaptamers
Project Overview
- In order to target nanostructures to cells, we developed adaptamers, universal nucleic acid adaptars which can link two substrates.
- Such an interface could also be used to link together entire cells for the study of cell-cell interactions and the linkage of two interacting proteins, in effect creating a nucleic acid enzyme.
- Adaptamers generally depend on aptamers, short sequences of nucleic acid that bind with high specificity and affinity to particular substrates.
- Tahiri-Alaoui et al. created the first aptamer in 2002, consisting of two aptamer sequences linked together by a bulky basepairing region ~100 nucleotides long.
- Our goal was to create an adaptamer that could link together streptavidin and thrombin. Delivery of thrombin to a streptavidin-coated magnetic bead would show the potential for delivery of a macromolecule to a cell surface (see gallery).
- Additionally, we wished to be able to be able to quench adaptamer function through the addition of an adapatamer-disabling oligonucleotide (see gallery).
Results
- Our design consisted of a streptavidin aptamer and thrombin aptamer linked together by a short, variable-length double-stranded region of linker DNA.
- In order to prevent interaction of linker DNA with aptamers, we wrote a program that can evolve a sequence for the linking region given two aptamer sequences. This program can be used for any aptamer sequences and will be utilized for future adaptamer designs.
- We successfully showed that four separate adaptamer designs are capable of targeting thrombin to streptavidin-coated magnetic beads by probing targeted beads with thrombin antibodies (see gallery).
- We successfully showed that addition of a low concentration of displacement strand which breaks apart adaptamers was capable of quenching adaptamer function (see gallery).
- Interestingly, high concentrations of displacement strand led to greater maintenance of thrombin targeting. See Project Notebook for details. We have proposed a lever-hypothesis for this observation (see gallery).
Future Plans
- We will demonstrate the modular design of adaptamers by using an adaptamer to target thrombin to Jurkat cells.
- We will attempt to prove the lever-hypothesis.
Electronic Notebook
- [http://openwetware.org/wiki/IGEM:Harvard/2006/Adaptamers/Overview openwetware page]
Cell surface streptavidin
Project Overview
- The cell surface streptavidin project approaches targeting from a different direction, that is, from the cell. While the adaptamer project uses nucleic acids to target any two substrates to each other, the cell surface streptavidin project seeks to target any substrate(s) to the cell surface.
- The method of targeting would be implemented through the expression of streptavidin protein on the cell surface. Streptavidin is a protein which binds strongly to the biotin molecule, thus there is a common practice of biotinylating (adding biotin to) nucleic acids or peptides for streptavidin affinity purification or antibody conjugation. We would be utilizing this strong streptavidin-biotin binding to target any biotinylated nucleic acid or peptide to the outside of a cell expressing streptavidin on the surface. Here are some potentially useful applications.
- bringing a biotinylated protein to the cell surface for facilitated interaction with some other surface element.
- linking a cell with another protein/cell via a biotinylated aptamer.
- delivering a DNA nanobox to the cell surface through a biotinylated oligonucleotide.
- Streptavidin would be expressed on the cell surface through the Lpp-OmpA surface display vehicle (Earhart, 2000). The complete vehicle consists of three fused protein domains.
- 20-amino-acid signal peptide and the first 9 amino acids of lipoprotein (Lpp). This targets the protein to the outer membrane.
- Amino acids #46-66 (one transmembrane domain) or #46-159 (five transmembrane domains) of outer membrane protein A (OmpA). This spans the protein across the outer membrane to the cell surface.
- The surface protein. Francisco et al. successfully expressed beta-lactamase on the surface of E. coli, as well as organophosphate hydrolase and variable antibody chains.
- Assembly of the fusion protein would be carried out through a modified BioBricks assembly for protein domains (Phillips and Silver, 2006). Standard BioBricks parts separated from the flanking XbaI and SpeI sites by a single spacer nucleotide, in order to prevent Dam methylation. If you leave out these spacer nucleotides, the mixed site formed between assembled parts is six base pairs long, and so reading frame can be maintained between assembled protein domains.
Results
- We completed assembly of constructs using the following BioBrick parts.
- J04500. a composite part of a lac promoter (R0010) and a strong ribosome binding site (B0031)
- J36835. Lpp, the lipoprotein signal peptide
- J36837 or J36838. OmpA, one (O1) or five (O5) transmembrane domains, respectively.
- J36841 or J36843. Streptavidin, either wild-type (SW) from the Ting lab at MIT or single-chain dimeric (SD) from the Cantor lab at BU.
- Streptavidin exists naturally as a soluble tetramer, but restriction to the surface might allow only monomeric/dimeric forms. What is interesting is that there has been research done to engineer soluble monomeric/dimeric streptavidin, in order to render biotin binding less strong but more easily reversible (Wu, 2005). It can be imagined that SW would be displayed on the surface as a monomer and SD, as a dimer.
- Both SW and SD include His6 tags at the ends of their amino acid sequences.
- After transformation of these constructs into Top10F' cells and induction with IPTG, Western blots were performed with cell lysates, probing with anti-his6(C-term) antibody and with anti-streptavidin antibody. Distinct bands were observed at the expected sizes in anti-his6 probing, and bands were observed at the same places with the anti-streptavidin probing. These results suggest the following.
- The promoter and ribosome binding site are functioning correctly for expression of these fusion protein construct.
- The BioBricks assembly of the fusion protein was successful in that reading frame was maintained, since the coding sequence for the His6 tag is found at the end of the construct.
- The streptavidin part of the fusion protein is still folding in such a way that anti-streptavidin antibody can recognize it.
Future Plans
- We need to determine whether or not the construct is being localized to the outer membrane. We can separate the cell lysate by centrifugation, isolate the outer membrane proteins, and then perform Western blots, probing with anti-his6 and anti-streptavidin antibody.
- If the construct is indeed being localized to the outer membrane, we then need to determine if the streptavidin is being displayed functionally on the cell surface. We can probe whole cells with anti-streptavidin antibodies or even fluorescently tagged streptavidin aptamers for in-cell westerns, or we can visualize surface binding of biotinylated, fluorescently tagged oligonucleotides under a microscope.
- If streptavidin is being expressed on the cell surface, we can switch in other engineered streptavidin clones and compare biotin binding. We can also try adding a length of amino acids between OmpA and streptavidin, which might give spatial flexibility to allow formation of tetramers on the cell surface or to allow the streptavidin to extend outside of any extracellular complexes.
Electronic Notebook
- [http://openwetware.org/wiki/IGEM:Harvard/2006/Fusion_proteins openwetware page]
References
- Francisco JA, Earhart CF, and Georgiou G. Transport and anchoring of beta-lactamase to the external surface of Escherichia coli. Proc Natl Acad Sci U S A 1992 Apr 1; 89(7) 2713-7.
- Earhart CF. Use of an Lpp-OmpA fusion vehicle for bacterial surface display. Methods Enzymol 2000; 326 506-16.
- Aslan FM, Yu Y, Mohr SC, and Cantor CR. Engineered single-chain dimeric streptavidins with an unexpected strong preference for biotin-4-fluorescein. Proc Natl Acad Sci U S A 2005 Jun 14; 102(24) 8507-12.
- Wu SC and Wong SL. Engineering soluble monomeric streptavidin with reversible biotin binding capability. J Biol Chem 2005 Jun 17; 280(24) 23225-31.
- Howarth M, Chinnapen DJ, Gerrow K, Dorrestein PC, Grandy MR, Kelleher NL, El-Husseini A, and Ting AY. A monovalent streptavidin with a single femtomolar biotin binding site. Nat Methods 2006 Apr; 3(4) 267-73.
A Circadian Oscillator for E.coli
Project Overview
- Oscillators are used in a variety of electronic circuits and would be essential in complex, time-dependant biocircuitry. The synthetic "repressilator" system engineered by Elowitz et al. (2000), though a good proof of concept, lacks the stability needed for long-term usage.
- Cyanobacteria have a naturally-evolved oscillator driven by the interactions between three proteins named KaiA, KaiB, and KaiC (see diagram at left). This "Kai clock" does not require transcriptional regulation and has been found to oscillate in vitro (Nakajima et al. 2005). It is also robust and can be modified for longer and shorter periods by point mutations in the Kai genes (Kondo et al. 1994).
- Based on these discoveries, our goal for the summer was to reconstitute the Kai oscillation cycle in E. coli. This would be the first step in creating a new oscillator part for the registry, as well as providing an important breakthrough for circadian biology research.
- The transcription factors that link the Kai clock to gene regulation in cyanobacteria are not well understood. Therefore we tested our clock in E. coli by measuring the amounts of phosphorylated and unphosphorylated KaiC via Western blot.
Results
- We have succesfully created BioBricks of the Kai genes and several functional constructs.
- As the Western blot image to the right indicates, we were able to express the three Kai proteins in E. coli, and show the predicted interaction between KaiA and KaiC and possible interaction between KaiB and KaiC.
Future Plans
- Short term plans include replicating our previous Western blot results as well as further demonstrating interaction between KaiA, KaiB, and KaiC.
- In cyanobacteria, the Kai clock is reset by light/dark transitions. This serves to synchronize their circadian rhythms with the day/night cycle. However, the molecular mechanism behind this synchronization is not yet well understood, so we cannot transfer it to E.coli. Instead, we have designed a set of experiments using inducible promoters for the Kai genes to synchronize the Kai clocks within each cell and between cells in a culture . Our goal is to coerce a culture of E.coli cells into synchronized oscillation, which we can then measure by Western blot.
- As more is discovered about the intermediate factors between the Kai clock and gene regulation in cyanobacteria, we would like to leverage these findings to make the Kai clock drive other components in a biological circuit.
Electronic Notebook
- [http://openwetware.org/wiki/IGEM:Harvard/2006/Cyanobacteria openwetware page]
Complete Electronic Notebooks
Detailed records of our summer activities, including results, can be found on openwetware, which the team used to host its [http://openwetware.org/wiki/IGEM:Harvard/2006 electronic notebook]. Links to specific project pages can be found in the above descriptions.