BU06:Research

From 2006.igem.org

(Difference between revisions)
Jump to: navigation, search
Line 73: Line 73:
===Background===
===Background===
-
So the main task, as I understand it, is this (and I might have some of the specifics a bit wrong, so take this with a grain of salt): we want to make a new Part that contains the Lux [http://en.wikipedia.org/wiki/Operon operon] (for clarity I am going to capitalize "Part" when I use it in the sense of a genetic Part from the registry).  The physical manifestation of a Part is a special plasmid called a "biobrick".  There are variety of biobricks, but all have fundamentally the same design: all contain an antibiotic resistance gene (a selector), an origin of replication, perhaps some other things, and the actual Part + "biobrick ends."  The biobrick ends are a specific sequence of restriction sites which bracket the Part in a standard way, so that this section of the plasmid is always organized in the following manner: EcoRI - XbaI - INSERT - SpeI - PstI, where INSERT designates the actual Part ( i.e. the Lux operon).  It is essential that these four particular restriction sites occur only once, in the given order, in the plasmid, for their standard organization and single occurance in each biobrick enables their modularity.  Hence the INSERT - the Part - cannot contain any of the four restriction sites.  I haven't checked if the Lux operon contains any of them, but it's pretty big, so chances are it does, and thus our primary challenge will be rengineering the operon to lack these sites (via the introduction of silent point mutations).
+
So the main task, as I understand it, is this (and I might have some of the specifics a bit wrong, so take this with a grain of salt): we want to make a new Part that contains the Lux [http://en.wikipedia.org/wiki/Operon operon] (for clarity I am going to capitalize "Part" when I use it in the sense of a genetic part from the Registry).  The physical manifestation of a Part is a special DNA sequence called a "BioBrick standard biological part".  There are variety of BioBrick plasmids that contain one or more Parts, but all have fundamentally the same design: all contain an antibiotic resistance gene (a selector), an origin of replication, perhaps some other things, and the actual Part that has "BioBrick ends."  The BioBrick ends consist of specific patterns of restriction sites which bracket the Part in a standard way, so that this section of the plasmid is always organized in the following manner: EcoRI - XbaI - INSERT - SpeI - PstI, where INSERT designates the actual functional Part (''e.g.,'' the Lux operon).  It is essential that these four particular restriction sites occur only once -- and in the given order -- in the plasmid because their standard organization and single occurrence in each BioBrick enables the modularity and composability of the Parts.  Hence the INSERT - the Part - must not contain any of the four restriction sites.  I haven't checked to see if the Lux operon contains any of them, but it's pretty big, so chances are it does, and thus our primary challenge will be to rengineer the operon to remove these sites (via the introduction of silent point mutations).
===Questions===
===Questions===
-
* Where do we get the operon / which one do we use?
+
* Where do we get the operon and which one do we use?
-
* Into which biobrick chassis should we insert it?
+
* Into which BioBrick chassis should we insert it?
-
* What would be the most generally-useful design?
+
* What would be the most generally useful design?
-
** a luxCDABE-part & a luxI part, to facilitate reporter functions (where does luxR go?)
+
** a luxCDABE part and a luxI part, to facilitate reporter functions (where does luxR go?)
===Ideas===
===Ideas===
-
* "Proteins that affect the wavelength of the emitted light, lumazine and yellow fluorescence protein have been isolated from Photobacterium and Vibrio species, respectively.  The lumazine proteins shift the color of the light to shorter wavelengths than 490 nm..." ([http://www.citeulike.org/user/BUiGEM/article/682278 Meighen 1991])  Perhaps we could build a circuit to modulate the emitted wavelength by periodically expressing a carefully-chosen fluoresence protein.  Think FRET and BRET.
+
* "Proteins that affect the wavelength of the emitted light, lumazine and yellow fluorescence protein have been isolated from ''Photobacterium'' and ''Vibrio'' species, respectively.  The lumazine proteins shift the color of the light to wavelengths shorter than 490 nm..." ([http://www.citeulike.org/user/BUiGEM/article/682278 Meighen 1991])  Perhaps we could build a circuit to modulate the emitted wavelength by periodically expressing a carefully-chosen fluoresence protein.  Think FRET and BRET.
-
* Let's modify the ''lux'' operon so our bacteria can play [http://en.wikipedia.org/wiki/Conway's_Game_of_Life Conway's Game of Life].  In the game, discrete "cells" interact with one another according to four extremely simple rules, which essentially boil down to this: if a cell has too many or too few neighbors it turns off, otherwise it turns/stays on.  These rules and the initial state of all the cells often produce systems of fascinating and lifelike complexity.  Perhaps we could add a circuit such that LuxI only activated in response to a narrow "medium" range of concentrations of its autoinducer (3OC6HSL), not too much or too little.  In fact, I think such a circuit has already been built by the Weiss lab and demonstrated with their infamous bullseye.  Damn!  It looks like the [http://www.princeton.edu/~rweiss/ Weiss lab] already beat us to the Game of Life idea.  Daaaarn.  Well, maybe we could do it better, or something.  Actually initialize the system with an interesting pattern using something like the UTAustin biofilm system.  I mean, we could run a ''gigantic'' board!  In 3D!  With bioluminesence!  I wonder at what threshold of gamespace our massively parallel computation would begin to outperform the serial speed of a modern desktop computer?  A cubic foot?  A cubic meter?  Besides which, it would be so ironic.
+
* Let's modify the ''lux'' operon so our bacteria can play [http://en.wikipedia.org/wiki/Conway's_Game_of_Life Conway's Game of Life].  In the game, discrete "cells" interact with one another according to four extremely simple rules, which essentially boil down to this: if a cell has too many or too few neighbors it turns off, otherwise it turns/stays on.  These rules and the initial state of all the cells often produce systems of fascinating and lifelike complexity.  Perhaps we could add a circuit such that LuxI would only be activated in response to a narrow "medium" range of concentrations of its autoinducer (3OC6HSL), not too much or too little.  In fact, I think such a circuit has already been built by the Weiss lab and demonstrated with their infamous bullseye.  Damn!  It looks like the [http://www.princeton.edu/~rweiss/ Weiss lab] already beat us to the Game of Life idea.  Daaaarn.  Well, maybe we could do it better, or something.  Actually initialize the system with an interesting pattern using something like the UTAustin biofilm system.  I mean, we could run a ''gigantic'' board!  In 3D!  With bioluminesence!  I wonder at what threshold of gamespace our massively parallel computation would begin to outperform the serial speed of a modern desktop computer?  A cubic foot?  A cubic meter?  Besides which, it would be so ironic.
===Progress===
===Progress===
-
"Vibrio fischeri regulatory protein LuxR (luxR) gene, complete cds; LuxICDABEG operon, complete sequence; and unknown gene."  Check out who the first author is: one T. Knight, Artificial Intelligence Laboratory, MIT!  We should check and see if he still has some! PubMed [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=5726577 GI:5726577]
+
"''Vibrio fischeri'' regulatory protein LuxR (luxR) gene, complete cds; LuxICDABEG operon, complete sequence; and unknown gene."  Check out who the first author is: one T. Knight, Artificial Intelligence Laboratory, MIT!  We should check and see if he still has some! PubMed [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=5726577 GI:5726577]
-
"Plasmid pUCD615, containing the V. fisheri luxC, luxD, luxA, luxB, and luxE genes without a promoter, was the parent plasmid for two genetic constructions... These plasmids were placed by CaCl2 transformation into two E. coli strains." [http://www.citeulike.org/user/BUiGEM/article/683483 Van Dyk 1994]
+
"Plasmid pUCD615, containing the ''V. fisheri luxC, luxD, luxA, luxB,'' and ''luxE'' genes without a promoter, was the parent plasmid for two genetic constructions... These plasmids were placed by CaCl2 transformation into two ''E. coli'' strains." [http://www.citeulike.org/user/BUiGEM/article/683483 Van Dyk 1994]
====Illuminesence cassette on puc19====
====Illuminesence cassette on puc19====
Tom Knight has streaked out two strains of ''E. coli'' for us on Amp+ plates.  One strain contains a ''Vibrio fischeri''  MJ1 luminescence cassette on a puc19 vector and the other a ''Photorhabdus luminescens'' luminescence cassette on a puc19 vector. (They spent the night growing above my refrigerator.)  The [http://openwetware.org/wiki/Vectors#Common_vectors vectors] page in OpenWetWare has a link to the sequence of [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=6691170 puc19 in ncbi], as well as some other vector-related resources like plasmid-plotting software.
Tom Knight has streaked out two strains of ''E. coli'' for us on Amp+ plates.  One strain contains a ''Vibrio fischeri''  MJ1 luminescence cassette on a puc19 vector and the other a ''Photorhabdus luminescens'' luminescence cassette on a puc19 vector. (They spent the night growing above my refrigerator.)  The [http://openwetware.org/wiki/Vectors#Common_vectors vectors] page in OpenWetWare has a link to the sequence of [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=6691170 puc19 in ncbi], as well as some other vector-related resources like plasmid-plotting software.
-
* He mentioned that we probably wouldn't want the ''V. fishcheri'' operon because its illuminescent activity is heat-sensitive and only occurs at relatively low temperatures (below 30 C?), so we should start investigating ''P luminescens''.
+
* He mentioned that we probably wouldn't want the ''V. fishcheri'' operon because its luminescent activity is heat-sensitive and only occurs at relatively low temperatures (below 30 C?), so we should start investigating ''P luminescens''.
-
* He also mentioned that they would work best in liquid culture with some agitation to facilitate the diffusion of oxygen into solution, which is in high demand in the luminescence reaction.
+
* He also mentioned that they would work best in liquid culture with some agitation to facilitate the diffusion of oxygen into solution, which is in high demand for the luminescence reaction.
I'm bringing the plates to Dr. Gardner's lab today and will get them incubating and then growing in TMB or something else appropriate.
I'm bringing the plates to Dr. Gardner's lab today and will get them incubating and then growing in TMB or something else appropriate.
====Accession Numbers====
====Accession Numbers====
-
The accession number for the ''V. fischeri'' cassette is [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=5726577 AF170104], which I sequenced a while back.  The accession number for the ''P. luminescens'' cassette is [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=155405 M90093], sequenced by Ed Meighan.  If you need them, I have genomic DNA and living cells of both of these strains.  You might want to grow some of them up just to see the native luminescence.  The ''V. fischeri MJ1'' strain requires marine medium, which I can get you the composition of.  If you need help in designing biobricks from these, I'm here for (cheap) consultation.  Tom Knight  [[User:Tk|Tk]] 20:26, 8 June 2006 (EDT)
+
The accession number for the ''V. fischeri'' cassette is [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=5726577 AF170104], which I sequenced a while back.  The accession number for the ''P. luminescens'' cassette is [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=155405 M90093], sequenced by Ed Meighan.  If you need them, I have genomic DNA and living cells of both of these strains.  You might want to grow some of them up just to see the native luminescence.  The ''V. fischeri MJ1'' strain requires marine medium, whose composition I can get for you.  If you need help in designing BioBricks from these, I'm here for (cheap) consultation.  Tom Knight  [[User:Tk|Tk]] 20:26, 8 June 2006 (EDT)
====Plasmids for you====
====Plasmids for you====
Line 109: Line 109:
==Sequence details==
==Sequence details==
-
[http://www.ai.mit.edu/projects/ntt/documents/proposals2000/MIT9904-10/proposal.html According] to Tom Knight, the ''Photorhabdus luminescens''  luxCDABE operon that he cloned is NCBI accession number [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=155405 M90093]. I checked this sequence against the biobrick restriction enzymes (EcoRI, XbaI, SpeI, PstI, NotI) using the [http://bioinformatics.org/sms2/rest_summary.html Sequence Manipulation Suite]. Results: EcoRI cuts at the ends of the sequence (+2 and -4; i.e., the original sequence is intended to be cut out of its vector with EcoRI); XbaI cuts in the middle (+2411); and SpeI, PstI, and NotI do not cut M00093. The question therefore becomes, did Tom Knight's group add or remove restriction sites? We have the DNA, we can test this in lab.
+
[http://www.ai.mit.edu/projects/ntt/documents/proposals2000/MIT9904-10/proposal.html According] to Tom Knight, the ''Photorhabdus luminescens''  luxCDABE operon that he cloned is NCBI accession number [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=155405 M90093]. I checked this sequence against the BioBrick restriction enzymes (EcoRI, XbaI, SpeI, PstI, NotI) using the [http://bioinformatics.org/sms2/rest_summary.html Sequence Manipulation Suite]. Results: EcoRI cuts at the ends of the sequence (+2 and -4; ''i.e.,'' the original sequence is intended to be cut out of its vector with EcoRI); XbaI cuts in the middle (+2411); and SpeI, PstI, and NotI do not cut M00093. The question therefore becomes, did Tom Knight's group add or remove restriction sites? We have the DNA, we can test this in lab.
Line 118: Line 118:
* What about re-engineering ''E. coli'' to repair things... such as fading paint on a building?  I guess that's just like bioremediation.
* What about re-engineering ''E. coli'' to repair things... such as fading paint on a building?  I guess that's just like bioremediation.
* This is really wild: what if we understood the process from stem cell to tooth so well that we could predict and remodel the final structure using computers and then reprogram the stem cells for biofabrication?  It wouldn't exactly be ''rapid'' prototyping, but it would be massively cheap!
* This is really wild: what if we understood the process from stem cell to tooth so well that we could predict and remodel the final structure using computers and then reprogram the stem cells for biofabrication?  It wouldn't exactly be ''rapid'' prototyping, but it would be massively cheap!
-
Re: from what I thought, the understanding of stem cell lineage is not very well documented, with lots of discrepencies, and laboratory techniques to recreate them are few and very difficult! I may be wrong tho...
+
Re: from what I thought, the understanding of stem cell lineage is not very well documented, with lots of discrepancies, and laboratory techniques to recreate them are few and very difficult! I may be wrong tho...
* I know people have transformed the membrane oscillations of yeasts into [http://www.darksideofcell.info/ audible sounds] (using an atomic force microscopes) and I wonder if ''E. coli'' could be signalled or manipulated in some way with acoustic waves.
* I know people have transformed the membrane oscillations of yeasts into [http://www.darksideofcell.info/ audible sounds] (using an atomic force microscopes) and I wonder if ''E. coli'' could be signalled or manipulated in some way with acoustic waves.
--[[User:Macowell|Mac]] 00:35, 14 June 2006 (EDT)
--[[User:Macowell|Mac]] 00:35, 14 June 2006 (EDT)

Revision as of 21:22, 29 May 2007

BU06.jpg
Schedule Research Fundraising Resources Members Contact

Back to the BU iGEM main page

Contents

Team Research

Team C

Goal

Isolate luxCDABE and add the 4 BioBrick restriction sites to the ends of the gene.

Members

  • Melissa
  • Felix
  • Camilo
  • Billy

Meeting Schedule

  • Lab time: Wednesdays
Upcoming Meetings:
Wednesday July 26th - 3pm Ingalls



Team D

Goal

Mutagenesis in order to remove XbaI site from middle of luxCDABE.

Members

  • Richard
  • Alex K.
  • Kevin
  • Mike

Meeting Schedule

  • Lab time: Tuesdays
Upcoming Meetings:

Team A

Goal

Assembly, testing, and characterization of the LacZ photography system.

Members

  • Mac
  • Nancy
  • Nadav
  • Christine

Meeting Schedule

  • Lab time: Mondays
Upcoming Meetings:

Team B

Goal

Assembly of the luxCDABE BioBrick system and testing.
System design

Members

  • Frank
  • Alec
  • Alex P.
  • Roie
  • Avi
  • Umer

Meeting Schedule

  • Lab time: Fridays
Upcoming Meetings:

Lux Operon

This is a page about the Lux operon ([http://www.citeulike.org/user/BUiGEM/tag/gene_luxcdabe CiteULike]) and the technicalities of making it into a Part in the [http://partsregistry.org Registry].

Background

So the main task, as I understand it, is this (and I might have some of the specifics a bit wrong, so take this with a grain of salt): we want to make a new Part that contains the Lux [http://en.wikipedia.org/wiki/Operon operon] (for clarity I am going to capitalize "Part" when I use it in the sense of a genetic part from the Registry). The physical manifestation of a Part is a special DNA sequence called a "BioBrick standard biological part". There are variety of BioBrick plasmids that contain one or more Parts, but all have fundamentally the same design: all contain an antibiotic resistance gene (a selector), an origin of replication, perhaps some other things, and the actual Part that has "BioBrick ends." The BioBrick ends consist of specific patterns of restriction sites which bracket the Part in a standard way, so that this section of the plasmid is always organized in the following manner: EcoRI - XbaI - INSERT - SpeI - PstI, where INSERT designates the actual functional Part (e.g., the Lux operon). It is essential that these four particular restriction sites occur only once -- and in the given order -- in the plasmid because their standard organization and single occurrence in each BioBrick enables the modularity and composability of the Parts. Hence the INSERT - the Part - must not contain any of the four restriction sites. I haven't checked to see if the Lux operon contains any of them, but it's pretty big, so chances are it does, and thus our primary challenge will be to rengineer the operon to remove these sites (via the introduction of silent point mutations).

Questions

  • Where do we get the operon and which one do we use?
  • Into which BioBrick chassis should we insert it?
  • What would be the most generally useful design?
    • a luxCDABE part and a luxI part, to facilitate reporter functions (where does luxR go?)

Ideas

  • "Proteins that affect the wavelength of the emitted light, lumazine and yellow fluorescence protein have been isolated from Photobacterium and Vibrio species, respectively. The lumazine proteins shift the color of the light to wavelengths shorter than 490 nm..." ([http://www.citeulike.org/user/BUiGEM/article/682278 Meighen 1991]) Perhaps we could build a circuit to modulate the emitted wavelength by periodically expressing a carefully-chosen fluoresence protein. Think FRET and BRET.


  • Let's modify the lux operon so our bacteria can play [http://en.wikipedia.org/wiki/Conway's_Game_of_Life Conway's Game of Life]. In the game, discrete "cells" interact with one another according to four extremely simple rules, which essentially boil down to this: if a cell has too many or too few neighbors it turns off, otherwise it turns/stays on. These rules and the initial state of all the cells often produce systems of fascinating and lifelike complexity. Perhaps we could add a circuit such that LuxI would only be activated in response to a narrow "medium" range of concentrations of its autoinducer (3OC6HSL), not too much or too little. In fact, I think such a circuit has already been built by the Weiss lab and demonstrated with their infamous bullseye. Damn! It looks like the [http://www.princeton.edu/~rweiss/ Weiss lab] already beat us to the Game of Life idea. Daaaarn. Well, maybe we could do it better, or something. Actually initialize the system with an interesting pattern using something like the UTAustin biofilm system. I mean, we could run a gigantic board! In 3D! With bioluminesence! I wonder at what threshold of gamespace our massively parallel computation would begin to outperform the serial speed of a modern desktop computer? A cubic foot? A cubic meter? Besides which, it would be so ironic.


Progress

"Vibrio fischeri regulatory protein LuxR (luxR) gene, complete cds; LuxICDABEG operon, complete sequence; and unknown gene." Check out who the first author is: one T. Knight, Artificial Intelligence Laboratory, MIT! We should check and see if he still has some! PubMed [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=5726577 GI:5726577]

"Plasmid pUCD615, containing the V. fisheri luxC, luxD, luxA, luxB, and luxE genes without a promoter, was the parent plasmid for two genetic constructions... These plasmids were placed by CaCl2 transformation into two E. coli strains." [http://www.citeulike.org/user/BUiGEM/article/683483 Van Dyk 1994]

Illuminesence cassette on puc19

Tom Knight has streaked out two strains of E. coli for us on Amp+ plates. One strain contains a Vibrio fischeri MJ1 luminescence cassette on a puc19 vector and the other a Photorhabdus luminescens luminescence cassette on a puc19 vector. (They spent the night growing above my refrigerator.) The [http://openwetware.org/wiki/Vectors#Common_vectors vectors] page in OpenWetWare has a link to the sequence of [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=6691170 puc19 in ncbi], as well as some other vector-related resources like plasmid-plotting software.

  • He mentioned that we probably wouldn't want the V. fishcheri operon because its luminescent activity is heat-sensitive and only occurs at relatively low temperatures (below 30 C?), so we should start investigating P luminescens.
  • He also mentioned that they would work best in liquid culture with some agitation to facilitate the diffusion of oxygen into solution, which is in high demand for the luminescence reaction.

I'm bringing the plates to Dr. Gardner's lab today and will get them incubating and then growing in TMB or something else appropriate.

Accession Numbers

The accession number for the V. fischeri cassette is [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=5726577 AF170104], which I sequenced a while back. The accession number for the P. luminescens cassette is [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=155405 M90093], sequenced by Ed Meighan. If you need them, I have genomic DNA and living cells of both of these strains. You might want to grow some of them up just to see the native luminescence. The V. fischeri MJ1 strain requires marine medium, whose composition I can get for you. If you need help in designing BioBricks from these, I'm here for (cheap) consultation. Tom Knight Tk 20:26, 8 June 2006 (EDT)

Plasmids for you

I've been given to understand that you had no luck growing the cultures I streaked for you. I've redone the plates, and grown them up here, verifying that they are luminescent. Come and get them... Tk 12:21, 21 June 2006 (EDT)


Sequence details

[http://www.ai.mit.edu/projects/ntt/documents/proposals2000/MIT9904-10/proposal.html According] to Tom Knight, the Photorhabdus luminescens luxCDABE operon that he cloned is NCBI accession number [http://www.ncbi.nlm.nih.gov/entrez/viewer.fcgi?db=nucleotide&val=155405 M90093]. I checked this sequence against the BioBrick restriction enzymes (EcoRI, XbaI, SpeI, PstI, NotI) using the [http://bioinformatics.org/sms2/rest_summary.html Sequence Manipulation Suite]. Results: EcoRI cuts at the ends of the sequence (+2 and -4; i.e., the original sequence is intended to be cut out of its vector with EcoRI); XbaI cuts in the middle (+2411); and SpeI, PstI, and NotI do not cut M00093. The question therefore becomes, did Tom Knight's group add or remove restriction sites? We have the DNA, we can test this in lab.


Brainstorming

  • could we print LB + bacteria onto paper with an inkjet?
  • what about printing the AHL quorum signals? Or other chemicals that could spatially control E. coli or compel them to do something (i.e., cause them to "print" or digest a substrate)?
  • If we are successful with our light-repressed luminescence system, to what civic uses could we put it? Pathway/sidewalk lighting?
  • What about re-engineering E. coli to repair things... such as fading paint on a building? I guess that's just like bioremediation.
  • This is really wild: what if we understood the process from stem cell to tooth so well that we could predict and remodel the final structure using computers and then reprogram the stem cells for biofabrication? It wouldn't exactly be rapid prototyping, but it would be massively cheap!

Re: from what I thought, the understanding of stem cell lineage is not very well documented, with lots of discrepancies, and laboratory techniques to recreate them are few and very difficult! I may be wrong tho...

  • I know people have transformed the membrane oscillations of yeasts into [http://www.darksideofcell.info/ audible sounds] (using an atomic force microscopes) and I wonder if E. coli could be signalled or manipulated in some way with acoustic waves.

--Mac 00:35, 14 June 2006 (EDT)

Personal tools
Past/present/future years